FP250 | Zero Emissions

Zero Emissions Configuration:

With the Ener-Core Powerstation FP250, zero emissions – less than 1ppm NO_x, CO, and VOCs – can be achieved. In this configuration, fuel gas, instead of being aspirated with air prior to inlet, is externally pressurized and delivered directly into the Ener-Core Gradual Oxidizer. This configuration is most applicable for higher Btu fuels. With higher quality fuel, the added parasitic load for the external gas compression can be more readily optimized thus minimizing the decrease in overall site power output.

Figure above: Cycle diagram of Ener-Core Powerstation FP250 configured for zero emissions, where fuel is compressed and directly injected upstream of the Ener-Core Gradual Oxidizer.